Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.30 carbine

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - .30 Carbine

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 1.7

Case Length (IN) - 1.28

Full Case Capacity (GR WATER)  - 20

Bullet Length (IN) - .72

Barrel Length (IN) - 10

Bullet Seating Depth (IN) - .3

Displaced Water (GR) - 5.641

Effective Water Capacity of Case (GR) - 14.359

Effective Barrel Length (IN) - 9.02

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .30 Carbine

Caliber -.308 IN

Bullet Weight - 55 GR

Barrel Length - 9.02 in

Case Capacity - 14.359 GR of Water (CALC)

Bullet Diameter - .308 in

Sectional Density - .083

Volume Ratio - 12.6

Cartridge Temperature - 70 Degrees F.

Powder Class - VERY FAST POWDERS

Powder type - 2400, H-110, AA-#9 *Check Manual*

Charge/ Bullet Weight - 0.209

Calc. Powder Charge  - 11.5 GR

Load Den - 80%

Est. Muzzle Velocity - 2300 FT/SEC

Est. Peak Pressure - 38500 PSI

Powder Class - Alternate powder class not available.

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data - .30 Carbine

Powder type - 2400, H-110, AA-#9 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        10.8                           2200                     34000

       80                                        11.5                           2300                     38500

       85                                        12.2                           2400                     43300

       90                                        12.9                           2600                     48500*

       95                                        13.6                           2700                     53900*

     100                                        14.4                           2900                     60400*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved