Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.300 Savage

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - .300 Savage

Bullet Type - .22/sabot

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.33

Case Length (IN) - 1.861

Full Case Capacity (GR WATER)  - 52

Bullet Length (IN)  - .72

Barrel Length (IN) - 22

Bullet Seating Depth (IN) - .251

Displaced Water (GR) - 4.72

Effective Water Capascity of Case (GR) - 47.28

Effective Barrel Length (IN) - 20.39

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .300 Savage

Caliber - .308 IN

Bullet Weight - 55 GR

Barrel Length - 20.39 in

Case Capacity - 47.28 GR of Water (CALC)

Bullet Diameter - .308

Sectional Density - .083

Volume Ratio - 9

Cartridge Temperature - 70 Degrees F.

Powder Class - FAST POWDERS

 Powder Type - IMR-4198/RX7/S-4197 *Check Manual*

Charge/ Bullet Weight - 0.687

Calc. Powder Charge  - 37.8 GR

Load Den - 79.9%

Est. Muzzle Velocity - 3700 FT/SEC

Est. Peak Pressure -38600

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data -

Powder type - IMR-4198/RX7/S-4197 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        35.5                            3500                     34000

       80                                        37.8                            3700                     38600

       85                                        40.2                            3900                     43700

       90                                        42.6                            4200                     49000*

       95                                        44.9                            4400                     54500*

     100                                        47.3                            4600                     60400*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved