|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sabot Starter Kit
 |
| Click to enlarge image(s) |
Starter Kit includes
100 Sabots, The Sabot Seating die, and Free Printable reloading data.
The More You Order
The More You Save!
* Please keep in mind that the data is for reference only *
* Caution * case capacity calculations *
-------------------------------------------------------------------------------------------------
Cartridge case capacity may vary 5-10% between brands.
Cartridge Type - .300 Weatherby Magnum
Bullet Type - .22/sabot
Bullet Weight - 55
Butllet Diameter (IN) - .308
Overall Cartridge Length (IN) - 3.2
Case Length (IN) - 2.815
Full Case Capacity (GR WATER) - 98
Bullet Length (IN) - .72
Barrel Length (IN) - 24
Bullet Seating Depth (IN) - .335
Displaced Water (GR) - 6.3
Effective Water Capacity of Case (GR) - 91.7
Effective Barrel Length (IN) - 21.52
**1fd 1 Cartridge Load Development/** 4-26-93
--------------------------------------------------------------------------------------------------
Cartridge Data - .300 Weatherby Magnum
Caliber -.308 IN
Bullet Weight - 55 GR
Barrel Length - 21.52 in
Case Capacity - 91.7 GR of Water (CALC)
Bullet Diameter - .308
Sectional Density - .083
Volume Ratio - 5.3
Cartridge Temperature - 70 Degrees F.
Powder Class - MEDIUM FAST POWDERS
Powder Type - IMR-4895, H-4895, S-4065, AA-2495 *Check Manual*
Charge/ Bullet Weight - 1.435
Calc. Powder Charge - 78.9 GR
Load Den - 86%
Est. Muzzle Velocity - 4400 FT/SEC
Est. Peak Pressure - 40200 PSI
Alt Powder Type - IMR-4060, H-380, AA-2520 *Check Manual*
Powder Class - MEDIUM FAST POWDERS
Charge/ Bullet Weight - 1.362
Calc. Powder Charge - 74.9 GR
Load Den - 81.6%
Est. Muzzle Velocity - 4300 FT/SEC
Est. Peak Pressure - 38000 PSI
**For starting loads reduce Calc. powder charge by at least 10%**
**Alternate load information** 04-23-93
---------------------------------------------------------------------------------------------------
Cartridge Type - .300 Weatherby Magnum
Powder Type - IMR-4895, H-4895, S-4065, AA-2495 *Check Manual*
Load Density Charge Weight Velocity Pressure
% GR FPS PSI
75 68.8 3800 30600
80 73.4 4100 34800
85 77.9 4300 39200
90 82.5 4600 44000*
95 87.1 4900 49000*
100 97.1 5100 54300*
Alt Powder Type - IMR-4060, H-380, AA-2520
75 68.8 3900 32100
80 73.4 4200 36500
85 77.9 4500 41100
90 82.5 4700 46100*
95 87.1 5000 51400*
100 91.7 5300 57000** Warning - HIGH PRESSURE - REFERENCE ONLY !
|
|
Sabotco, LLC 1357 S 1500 E, Provo, UT 84606
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots
used for sabot slugs and sabot bullets are made from injection moulded
polycarbonate plastic. The sabot slug offers a faster flatter
trajectory than ammo fired without sabots.
Sabot Information Copyright © 2007. All rights reserved
|