|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sabot Starter Kit
 |
| Click to enlarge image(s) |
Starter Kit includes
100 Sabots, The Sabot Seating die, and Free Printable reloading data.
The More You Order
The More You Save!
* Please keep in mind that the data is for reference only *
* Caution * case capacity calculations *
-------------------------------------------------------------------------------------------------
Cartridge case capacity may vary 5-10% between brands.
Cartridge Type - .300 Winchester Magnum
Bullet Type - .22/sabot
Bullet Weight - 55
Butllet Diameter (IN) - .308
Overall Cartridge Length (IN) - 3
Case Length (IN) - 2.61
Full Case Capacity (GR WATER) - 88
Bullet Length (IN) - .72
Barrel Length (IN) - 24
Bullet Seating Depth (IN) - .33
Displaced Water (GR) - 6.260
Effective Water Capacity of Case (GR) - 81.794
Effective Barrel Length (IN) - 21.72
**1fd 1 Cartridge Load Development/** 4-26-93
--------------------------------------------------------------------------------------------------
Cartridge Data - .300 Winchester Magnum
Caliber -.308 IN
Bullet Weight - 55 GR
Barrel Length - 21.72 in
Case Capacity - 81.794 GR of Water (CALC)
Bullet Diameter - .308
Sectional Density - .083
Volume Ratio - 5.9
Cartridge Temperature - 70 Degrees F.
Powder Class - MEDIUM FAST POWDERS
Powder Type - IMR-3031, RX11, H-335, AA-2230, S-3032, WW-748, N-201 *Check Manual*
Charge/ Bullet Weight - 1.278
Calc. Powder Charge - 70.3 GR
Load Den - 85.9%
Est. Muzzle Velocity - 4400 FT/SEC
Est. Peak Pressure - 41900 PSI
Alt Powder Type - BLC-2, H-322, RX12, AA-2460, N-203 *Check Manual*
Powder Class - MEDIUM FAST POWDERS
Charge/ Bullet Weight - 1.344
Calc. Powder Charge - 73.9 GR
Load Den - 90.3%
Est. Muzzle Velocity - 4400 FT/SEC
Est. Peak Pressure - 42400 PSI
**For starting loads reduce Calc. powder charge by at least 10%**
**Alternate load information** 04-23-93
---------------------------------------------------------------------------------------------------
Cartridge Data - .300 Winchester Magnum
Powder type -IMR-3031, RX11, H-335, AA-2230, S-3032, WW-748, N-201 *Check Manual*
Load Density Charge Weight Velocity Pressure
% GR FPS PSI
75 61.3 3800 31900
80 65.4 4100 36300
85 69.5 4300 41000
90 73.6 4600 45900*
95 77.7 4900 51200*
100 81.8 5100 56700*
Powder Type - BLC-2, H-322, RX12, AA-2460, N-203
75 61.3 3600 29200
80 65.4 3900 33200
85 69.5 4100 37500
90 73.6 4400 42100*
95 77.7 4600 46900*
100 81.8 4900 52000** Warning - HIGH PRESSURE - REFERENCE ONLY !
|
|
Sabotco, LLC 1357 S 1500 E, Provo, UT 84606
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots
used for sabot slugs and sabot bullets are made from injection moulded
polycarbonate plastic. The sabot slug offers a faster flatter
trajectory than ammo fired without sabots.
Sabot Information Copyright © 2007. All rights reserved
|