Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.308 Herrett

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - .30 Herrett

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.1

Case Length (IN) - 1.604

Full Case Capacity (GR WATER)  - 35

Bullet Length (IN) - .72

Barrel Length (IN) - 14

Bullet Seating Depth (IN) - .224

Displaced Water (GR) - 4.212

Effective Water Capacity of Case (GR) - 30.788

Effective Barrel Length (IN) - 12.62

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .30 Herrett

Caliber - .308 IN

Bullet Weight - 55 GR

Barrel Length - 12.62 in

Case Capacity - 30.788 GR of Water (CALC)

Bullet Diameter - .308 in

Sectional Density - .083

Volume Ratio - 8.6

Cartridge Temperature - 70 Degrees F.

Powder Class - VERY FAST POWDERS

Powder type - 2400,H110,AA-#9 *Check Manual*

Charge/ Bullet Weight - 0.447

Calc. Powder Charge  - 24.6 GR

Load Den - 79.9%

Est. Muzzle Velocity - 3100 FT/SEC

Est. Peak Pressure - 39500 PSI

Powder Class - Alternate powder class not available

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data -

Powder type - 2400,H110,AA-#9 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        23.1                            2900                    34800

       80                                        24.6                            3100                    39500

       85                                        26.2                            3300                    44800

       90                                        27.7                            3500                    50100*

       95                                        29.2                            3700                    55700*

     100                                       30.8                             3900                    61900*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved