Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.30-30 Winchester

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - .30-30 Winchester

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.5

Case Length (IN) - 2.03

Full Case Capacity (GR WATER)  - 45

Bullet Length (IN) - .72

Barrel Length (IN) - 18

Bullet Seating Depth (IN) - .25 

Displaced Water (GR) - 4.701

Effective Water Capacity of Case (GR) - 40.299

Effective Barrel Length (IN) - 16.22

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .30-30 Winchester

Caliber -.308 IN

Bullet Weight - 55 GR

Barrel Length -16.22 in

Case Capacity - 40.299 GR of Water (CALC)

Bullet Diameter - .308 in

Sectional Density - .083

Volume Ratio - 8.4

Cartridge Temperature - 70 Degrees F.

Powder Class - FAST POWDERS

 Powder type - IMR-4198/RZ7/S-4197 *Check Manual*

Charge/ Bullet Weight - 0.585

Calc. Powder Charge  - 32.2 GR

Load Den - 79.9%

Est. Muzzle Velocity - 3500 FT/SEC

Est. Peak Pressure - 40300 PSI

Powder Class - Alternate powder class not available. 

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data -

Powder type - IMR-4198/RX7/S-4197 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        30.2                           3300                     35500

       80                                        32.2                           3500                     40300

       85                                        34.3                           3700                     45700

       90                                        36.3                           3900                     51200*

       95                                        38.3                           4200                     57000*

     100                                        40.3                           4400                     63100*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved